MCG SURGE PROTECTION
Showing 1–12 of 27 results
Transient surge energies from sources such as nearby lightning strikes, inductive load switching, ground loop currents, and electrostatic discharge are clamped by AC protectors into the shared communication ground, resulting in damage to expensive communication hardware. 612/624/648 Series includes: 12, 24, and 48 port, 19” rack mounted protection units that feature 110 punchdown to RJ45 connectors. CAT6 performance. Also available in configurations that offer protection for Telco and ISDN circuits.
MCG’s line of 19″ rack mountable protectors provide reliable protection for your critical network hardware. Overvoltages that damage unprotected I/O ports are commonly caused by differences in the building’s ground potential at each end of the data cable run. These protectors react in nanoseconds to an overvoltage and limit it to a safe level. They are available in 16 and 32 port versions and easily install in a 19″ equipment rack or can be wall mounted (-WM models). Covering many different protocols including CAT 6, CCTV, and cable TV/satellite, these multi-port protectors prevent costly downtime. They are backed by MCG’s “No nonsense” 20-year warranty.
Transient surge energies from sources such as nearby lightning strikes, inductive load switching, ground loop currents, and electrostatic discharge are clamped by AC protectors into the shared communication ground, resulting in damage to expensive communication hardware. 612/624/648 Series includes: 12, 24, and 48 port, 19” rack mounted protection units that feature 110 punchdown to RJ45 connectors. CAT6 performance. Also available in configurations that offer protection for Telco and ISDN circuits.
MCG’s line of 19″ rack mountable protectors provide reliable protection for your critical network hardware. Overvoltages that damage unprotected I/O ports are commonly caused by differences in the building’s ground potential at each end of the data cable run. These protectors react in nanoseconds to an overvoltage and limit it to a safe level. They are available in 16 and 32 port versions and easily install in a 19″ equipment rack or can be wall mounted (-WM models). Covering many different protocols including CAT 6, CCTV, and cable TV/satellite, these multi-port protectors prevent costly downtime. They are backed by MCG’s “No nonsense” 20-year warranty.
Reliable protection, easy to install and a compact package make the DLP-3.92 an ideal protection choice. Designed for use on 10BASE-T networks, the unit will prevent costly downtime of sensitive networks by protecting NIC (network interface cards) hubs and relays. Units are virtually invisible to the network and will not affect data rates. The DLP-3.92 responds in nanoseconds to an overvoltage and instantly diverts harmful surge currents away from sensitive equipment. Units install in minutes.
The MCG DLP-4.0 series protect communication ports using RJ11 connectors. These ports are affected by differences in ground potential at each end of the data line cable caused by nearby lightning strikes. The protector turns on instantly when an overvoltage occurs and limits it to a safe level. The current is bypassed through the protector and away from sensitive equipment. The protector automatically resets, ready for the next transient.
The DLP-4.1 series is designed to protect a wide range of applications that use an RJ45 style connector. Employing the latest technologies in surge suppression, these devices are virtually invisible to the system. Units react in nanoseconds to divert transient currents away from sensitive equipment. The DLP-4.1 is an economical solution to transient problems. Units install in minutes.
The DLP-5.92 series are high speed single port protectors designed to protect Category 6 (Gigabit Ethernet) based protocols such as 1000BASE-T, 100BASE-T and 10BASE-T systems. The protectors prevent costly downtime by protecting NICs (network interface cards) hubs and relays. Using the latest protection technologies, units are virtually invisible to the high speed data path until a surge occurs. The DLP-5.92 reacts in nanoseconds causing the surge current to fl ow through the protector instead of the port. Installs in seconds.
The DLP-C5 is designed for use on high speed Cat 5e networks. The DLP-C5 is perfect for use on 10/100BASE-T protocols or facilities using 10BASE-T but have a Cat 5 infrastructure for future upgrades to 100BASE-T (100 megabits per second) speed. Lowcost and easy to install, the DLP-C5 prevents equipment damage due to nearby lightning strikes and AC power surges which cause differences in ground potential. These events can easily wipe out unprotected ports in microseconds. Units install in minutes.
MCG’s DLP-PoE series of protectors provide reliable, easy to install protection for equipment using the Power over Ethernet protocol. These single port protectors guard equipment from damage due to transient currents caused by differences in ground potential. Reacting in nanoseconds, the DLP-PoE series conducts surge currents away from sensitive equipment. Covers both Mode A and Mode B systems. Use the “-A” model for Mode A applications and the “-B” model for Mode B applications. Easy to install using RJ45 connectors.
Branch Panel Surge Protector Protect branch panels with the 120kA/phase 120LS series from MCG Surge Protection. The SPD offers three times redundant protection paths per phase and continuous monitoring of protection status. Sensitive equipment remains online and undamaged by transients, surges, and lightning. Mix and match options are available for a customized protector suited directly to your facility’s needs.
Branch Panel Surge Protector The Surge Free 150M, 125M, and 90M offer powerful modular protection at the branch panel. It is ideal when extensive diagnostics are not required, but brute-force surge protection is a #1 priority. The 150/125/90M models are backed by a twenty-year, no-nonsense warranty.
